D-302756
41
Available options are:
00s
(default in USA),
15s
,
30s
(default),
45s
,
60s
,
2m,
3m
and
4m
.
Note:
To comply with CP-01 requirements, "60s", "3m" and "4m" options are not available.
Note:
To comply with UL requirements, the abort time must not exceed 45 sec.
To Configure the Abort Time
1.
Make sure the system is disarmed and then press the
button
repeatedly until the PowerMax10-G2 display reads
"
INSTALLER MODE
".
2.
When the PowerMax10-G2 display reads
[
INSTALLER MODE
]
,
press
OK
I
.
The screen will now prompt you to enter your installer code.
OK
I
3.
Enter your Installer Code.
CODE
4.
Press the
or
buttons repeatedly and select the [
DEFINE
PANEL
] option.
or
5.
When the PowerMax10-G2 display reads [
DEFINE PANEL
], press
OK
I
The PowerMax10-G2 display will read [
01:ENTRY DELAY 1
].
OK
I
6.
When the PowerMax10-G2 display reads
[
01:ENTRY DELAY 1
],
press
the
or
button repeatedly until the display will read [
05:ABORT TIME
].
or
7.
Press
OK
I
and make the selection and then press
OK
I
to confirm.
The PowerMax10-G2 display will revert to [
05:ABORT TIME
].
OK
I
SELECT OPTION
OK
I
You can now press the
or
button to program any other menu in
"
DEFINE PANEL
"
or
press the
button to take you to "
<OK> TO EXIT
"
.
4.7.7 Configuring a Confirmed Alarm
Here you determine that if 2 successive alarms will occur during a specific period, the second alarm will be considered as a
confirmed alarm
for confirmed alarm reporting, (see par. 4.6.3.2 "Configuring the Event Types to be Reported").
Options:
disable
(default in USA),
30 min.
,
45 min.
,
60 min.
(default), or
90 min.
To Configure a Confirmed Alarm
1.
Make sure the system is disarmed and then press the
button
repeatedly until the PowerMax10-G2 display reads
"
INSTALLER MODE
".
2.
When the PowerMax10-G2 display reads
[
INSTALLER MODE
]
,
press
OK
I
.
The screen will now prompt you to enter your installer code.
OK
I
3.
Enter your Installer Code.
CODE
4.
Press the
or
button repeatedly and select the [
DEFINE PANEL
]
option.
or
5.
When the PowerMax10-G2 display reads [
DEFINE PANEL
], press
OK
I
The PowerMax10-G2 display will read [
01:ENTRY DELAY 1
].
OK
I
6.
When the PowerMax10-G2 display reads
[
01:ENTRY DELAY 1
],
press
the
or
button repeatedly until the display will read [
33:CONFIRM TIME
].
or
7.
Press
OK
I
and make the selection and then press
OK
I
to confirm.
OK
I
SELECT OPTION
05:ABORT TIME
33:CONFIRM TIME
01:ENTRY DELAY 1
ENTER CODE:
INSTALLER MODE
READY 00:00
DEFINE PANEL
05:ABORT TIME
01:ENTRY DELAY 1
ENTER CODE:
INSTALLER MODE
READY 00:00
DEFINE PANEL
