D-302756
37
You can now press the
button to take you to the "
SMS REPORT TEL#
"
menu (see the next section),
or
press the
button to take you to "
<OK>
TO EXIT
".
D. To Configure Reports to User by SMS
34.
When the PowerMax10-G2 display reads [
VOICE REPORT
], press the
button.
The PowerMax10-G2 display will read [
SMS REPORT TEL#
].
35.
When the PowerMax10-G2 display reads [
SMS REPORT TEL#
], press the
OK
I
button.
The PowerMax10-G2 display will read [
1st SMS tel#
].
OK
I
36.
Press the
OK
I
button and enter the first SMS phone number (including
area code, 16 digits maximum) to which pre-selected event types will be
reported.
OK
I
1
st
SMS TEL. NO
37.
Press the
OK
I
button.
The PowerMax10-G2 display will revert to [
1st SMS tel#
].
OK
I
38.
Press the
button.
The PowerMax10-G2 display will read [
2nd SMS tel#
].
39.
Press the
OK
I
button and enter the second SMS phone number (including
area code, 16 digits maximum) to which pre-selected event types will be
reported.
OK
I
2
nd
SMS TEL. NO
40.
Press the
OK
I
button.
The PowerMax10-G2 display will revert to [
2nd SMS tel#
].
OK
I
41.
Press the
button.
The PowerMax10-G2 display will read [
3rd SMS tel#
].
42.
Press the
OK
I
button and enter the third SMS phone number (including
area code, 16 digits maximum) to which pre-selected event types will be
reported.
OK
I
3
rd
SMS TEL. NO
43.
Press the
OK
I
button.
The PowerMax10-G2 display will revert to [
3
rd
SMS tel#
].
OK
I
44.
Press the
button.
The PowerMax10-G2 display will read [
4
th
SMS tel#
].
45.
Press the
OK
I
button and enter the fourth SMS phone number (including
area code, 16 digits maximum) to which pre-selected event types will be
reported.
OK
I
4
th
SMS TEL. NO
46.
Press the
OK
I
button.
The PowerMax10-G2 display will revert to [
4
th
SMS tel#
].
OK
I
You can now press the
button to take you to the "
1st private tel#
"
menu (see step
C. To Configure Event Types to be Reported to User
),
or
press the
button to take you to "
<OK> TO EXIT
".
4.7 Security System Configuration
4.7.1 Enable Cross Zoning
Here you determine whether cross zoning will be active or inactive. Cross zoning is a method used to counteract false
alarms - an alarm will not be initiated unless two adjacent zones are violated within a 30-second time limit.
This feature is active only when arming AWAY and only with zone couples from zone No. 18 to 27 (18 and 19, 20 and 21,
etc.). You may use any one of these zone couples to create a “cross-zoned” area.
Note:
If one of two crossed zones is bypassed (see Para. 4.3.5), the remaining zone will function independently.
4TH SMS tel#
4th SMS tel#
3rd SMS tel#
3rd SMS tel#
2nd SMS tel#
2nd SMS tel#
1st SMS tel#
1st SMS tel#
SMS REPORT TEL#
Cross Zoning
