Visonic PowerMax10-G2, Installer'S Manual

Page: 30 / 78

D-302756 29
The PowerMax10-G2 display will read [
IP RCVR 1
]. Here you enter the IP
address of the IP receiver that is located in the 1
st
Monitoring Station.
44. When the PowerMax10-G2 display reads [
IP RCVR 1
], press the
OK I
button.
OK I
45.
Enter the IP address of the first IP receiver (see table at the end of this section
for further details).
46. Press the
OK I
button.
The PowerMax10-G2 display will revert to [
IP RCVR 1
].
OK I
47. Press the button.
The PowerMax10-G2 display will read [
IP RCVR2
]. Here you enter the IP
address of the IP receiver that is located in the 2
nd
Monitoring Station.
48. When the PowerMax10-G2 display reads [
IP RCVR2
], press the
OK I
button.
OK I
49.
Enter the IP address of the second IP receiver (see table at the end of this
section for further details).
50. Press the
OK I
button.
The PowerMax10-G2 display will revert to [
IP RCVR2
].
OK I
51. Press the button.
The PowerMax10-G2 display will read [
SMS RCVR 1
]. Here you enter the
telephone number of the SMS receiver that is located in the 1
st
Monitoring
Station.
52. When the PowerMax10-G2 display reads [
SMS RCVR 1
], press the
OK I
button.
OK I
53.
Enter the telephone number of the first SMS receiver (see table at the end of
this section for further details).
54. Press the
OK I
button.
The PowerMax10-G2 display will revert to [
SMS RCVR 1
].
OK I
55. Press the button.
The PowerMax10-G2 display will read [
SMS RCVR2
]. Here you enter the
telephone number of the SMS receiver that is located in the 2
nd
Monitoring
Station.
56. When the PowerMax10-G2 display reads [
SMS RCVR2
], press the
OK I
button.
OK I
57.
Enter the telephone number of the second SMS receiver (see table at the end
of this section for further details).
58. Press the
OK I
button.
The PowerMax10-G2 display will revert to [
SMS RCVR2
].
OK I
You can now press the button to take you to the "
PSTN RPRT FORMAT
"
menu , or press the button to take you to "
<OK> TO EXIT
".
Compatible Monitoring Station receivers are:
Osborne-Hoffman model 2000, Ademco Model 685, FBII Model CP220, Radionics Model D6500, Sur-Gard Model
SG-MLR2-DG and Silent Knight Model 9500.
IMPORTANT: In telephone number locations and account number locations, you may be required to enter hexadecimal
digits. In telephone number locations, these digits are used as codes to control the dialer:
Hex.Digit Keying
Sequence
Code
Significance
A <#>
⇒
<0> Applicable only at the beginning of a number - the dialer waits 10 seconds or
waits for dial tone, whichever comes first and then dials.
D <#>
⇒
<3> Applicable only at the beginning of a number - the dialer waits 5 seconds for dial
tone and goes on hook if none is received.
E <#>
⇒
<4> Applicable only in the middle of the number - the dialer waits 5 seconds
F <#>
⇒
<5> Not applicable in phone numbers
SMS RCVR2
SMS RCVR2
SMS RCVR 1
SMS RCVR 1
IP RCVR2
IP RCVR2
IP RCVR 1
IP RCVR 1
000.000.000.000
000.000.000.000