Visonic PowerMax10-G2, Installer'S Manual

Page: 25 / 78

24 D-302756
38. Press the button.
The PowerMax10-G2 display will read [
GPRS APN
]
39.
Enter the name of the APN Access Point used for the internet settings for the
GPRS (up to 40 digits).
Note: The table at the end of this section provides a list of the keys used by
the PowerMax10-G2 editor.
APN NAME
40. Press
OK I
to confirm.
The PowerMax10-G2 display will revert to [
GPRS APN
]
OK I
41. Press the button.
The PowerMax10-G2 display will read [
GPRS USERNAME
].
42.
Enter the username of the APN used for GPRS communications (up to 30
digits).
Note: The table at the end of this section provides a list of the keys used by
the PowerMax10-G2 editor.
APN USERNAME
43. Press
OK I
to confirm.
The PowerMax10-G2 display will revert to [
GPRS USERNAME
].
OK I
44. Press the button.
The PowerMax10-G2 display will read [
GPRS PASSWORD
].
45.
Enter the password of the APN used for GPRS communications (up to 16
digits).
Note: The table at the end of this section provides a list of the keys used by
the PowerMax10-G2 editor.
APN PASSWORD
46. Press
OK I
to confirm.
The PowerMax10-G2 display will revert to [
GPRS PASSWORD
].
OK I
47. Press the button.
The PowerMax10-G2 display will read [
PIN CODE
].
48.
Enter the PIN code of the SIM card installed in the PowerMax10-G2 unit (up to
16 digits). PIN CODE
49. Press
OK I
to confirm.
The PowerMax10-G2 display will revert to [
PIN CODE
].
OK I
50. Press the button.
The PowerMax10-G2 display will read [
FORCE HOME NTWK.
]. Here you
determine whether to force the SIM card to use the home network only and not
to select another network in case the home network cannot be found.
51. When the PowerMax10-G2 display reads [
FORCE HOME NTWK.
], press
OK I
.
The PowerMax10-G2 display will read [
disable
].
OK I
52. Press the or button to select between "
disable
" and
"
enable
", for example, "
enable
".
or
53. Press
OK I
to confirm the selection.
The PowerMax10-G2 display will revert to [
FORCE HOME NTWK.
].
OK I
54. Press the button.
The PowerMax10-G2 display will read [
SESSION TIMEOUT
]. Here you
determine whether the control panel will stay continuously connected via GPRS
FORCE HOME NTWK.
SMS REPORT
SESSION TIMEOUT
enable
enable
disable
FORCE HOME NTWK.
PIN CODE
PIN CODE
GPRS PASSWORD
GPRS PASSWORD
GPRS USERNAME
GPRS USERNAME
GPRS APN
GPRS APN