18
D-302756
You can now press the
OK
I
button to delete the device of the same type, or
press the
button to delete a different device, or press the
button to
take you to "
<OK> TO EXIT
".
4.4.5 Modifying a Device
D. To Modify a Device
Note:
This procedure is applicable to detectors only.
1.
Make sure the system is disarmed and then press the
button
repeatedly until the PowerMax10-G2 display reads
"
INSTALLER MODE
".
2.
When the PowerMax10-G2 display reads
[
INSTALLER MODE
]
,
press
OK
I
.
OK
I
The screen will now prompt you to enter your installer code.
3.
Enter your Installer Code.
CODE
4.
Press the
button
and select the [
ZONES/DEVICES
] option.
5.
When the PowerMax10-G2 display reads [
ZONES/DEVICES
] press
OK
I
OK
I
The PowerMax10-G2 display will read [
ADD NEW DEVICES
].
6.
When the PowerMax10-G2 display reads
[
ADD NEW DEVICES
],
press
the
or
button
repeatedly until the display will read [
MODIFY
DEVICES
].
or
7.
Press
OK
I
.
The PowerMax10-G2 display will read [
CONTACT SENSORS
].
OK
I
8.
Press the
or
button repeatedly to select the desired sensor to be
modified. Select between "
CONTACT SENSORS
", "
MOTION SENSORS
", "
SMOKE
SENSORS
" and "
WIRED SENSORS
", for example, "
MOTION SENSORS
".*
or
9.
When the PowerMax10-G2 display reads [
Z01:Motion Sens
] press
OK
I
.
The PowerMax10-G2 display will read [
LOCATION
].
OK
I
10.
Press
OK
I
.
The PowerMax10-G2 display will read [
Z01: LOCATION
].
11.
When the PowerMax10-G2 display reads
[
LOCATION
]
,
press
OK
I
.
OK
I
The PowerMax10-G2 display will read [
Front door
].
12.
Press the
or
button repeatedly to select a location, or, enter the
location number, for example, "
Master Bdrm
".
or
13.
Press
OK
I
to confirm. The PowerMax10-G2 display will read [
Z01:ZONE
TYPE
].
OK
I
14.
When the PowerMax10-G2 display reads [
Z01: ZONE TYPE
], press
OK
I
.
The PowerMax10-G2 display will read [
12.Non-Alarm
].
OK
I
15.
Press the
or
button repeatedly to select a zone type, or, enter
the zone type number, for example, pressing 03 selects "
3. Home Delay
".
To understand the behavior of each zone, see section 4.4.2.3 Zone Types.
or
OK
I
16.
Press
OK
I
to confirm.
The PowerMax10-G2 display will read [
SET CHIME
].
17.
Press
OK
I
to change chime settings or press the
button to skip.
OK
I
Z01: SET CHIME
12.Non-Alarm
3. Home Delay
Master Bdrm
Z01:ZONE TYPE
Front door
Z01: LOCATION
Z01:Motion Sens
CONTACT SENSORS
ENTER CODE:
INSTALLER MODE
READY 00:00
ZONES/DEVICES
MODIFY
DEVICES
ADD NEW
DEVICES
