Visonic PowerMax10-G2, Installer'S Manual

Page: 32 / 78

D-302756 31
The PowerMax10-G2 display will read [
4 attempts
].
69. Press the or button repeatedly to select between "
2
attempts
", "
4 attempts
", "
8 attempts
", "
12 attempts
" and "
16
attempts
", for example, "
12 attempts
".
or
70. Press
OK I
to confirm the selection.
The PowerMax10-G2 display will revert to [
PSTN RPRT RETRY
].
OK I
71. Press the button.
The PowerMax10-G2 display will read [
GSM RPRT RETRY
]. Here you determine
the number of times the communicator will try to report via a cellular group
(GPRS, GSM and SMS) to the Monitoring Station.
72.
When the PowerMax10-G2 display reads [
GSM RPRT RETRY
], press the
OK I
button.
The PowerMax10-G2 display will read [
4 attempts
].
OK I
73. Press the or button repeatedly to select between
"
2 attempts
", "
4 attempts
", "
8 attempts
", "
12 attempts
" and "
16 attempts
",
for example, "
12 attempts
".
or
74. Press
OK I
to confirm the selection.
The PowerMax10-G2 display will revert to [
GSM RPRT RETRY
].
OK I
75. Press the button.
The PowerMax10-G2 display will read [
LAN RPRT RETRY
]. Here you determine
the number of times the communicator will try to report via the Broadband
Module communication to the Monitoring Station.
76.
When the PowerMax10-G2 display reads [
LAN RPRT RETRY
], press the
OK I
button.
The PowerMax10-G2 display will read [
4 attempts
].
OK I
77. Press the or button repeatedly to select between "
2
attempts
", "
4 attempts
", "
8 attempts
", "
12 attempts
" and "
16
attempts
", for example, "
12 attempts
".
or
78. Press
OK I
to confirm the selection.
The PowerMax10-G2 display will revert to [
LAN RPRT RETRY
].
OK I
You can now press the button to take you to the "
AUTO TEST TIME
"
menu , or press the button to take you to "
<OK> TO EXIT
".
4.6.3.7 Configuring the Auto Test Report
Continue below from the previous section or repeat steps 1 to 7 of section 4.6.3.1and then press the or
button repeatedly until the PowerMax10-G2 display will read [
AUTO TEST TIME
]
79. Press the button.
The PowerMax10-G2 display will read [
AUTO TEST TIME
]. Here you determine
the time at which the telephone line will be tested and reported to the Monitoring
Station.
80.
When the PowerMax10-G2 display reads [
AUTO TEST TIME
], press the
OK I
button.
OK I
81.
Enter the auto test time.
LAN RPRT RETRY
GSM RPRT RETRY
PSTN RPRT RETRY
AUTO TEST TIME
4 attempts
LAN RPRT RETRY
4 attempts
GSM RPRT RETRY
4 attempts
test time 12:00P
12 attempts
12 attempts
12 attempts
12 attempts
12 attempts
12 attempts