Visonic PowerMax10-G2, Installer'S Manual

Page: 22 / 78

D-302756 21
To Enable Siren Activation upon Telephone Line Failure
1. Make sure the system is disarmed and then press the button
repeatedly until the PowerMax10-G2 display reads "
INSTALLER MODE
".
2. When the PowerMax10-G2 display reads [
INSTALLER MODE
] , press
OK I
.
The screen will now prompt you to enter your installer code.
OK I
3.
Enter your Installer Code.
CODE
4. Press the or button repeatedly and select the [
DEFINE PANEL
]
option.
or
5. When the PowerMax10-G2 display reads [
DEFINE PANEL
], press
OK I
The PowerMax10-G2 display will read [
01:ENTRY DELAY 1
].
OK I
6.
When the PowerMax10-G2 display reads [
01:ENTRY DELAY 1
], press the
or button repeatedly until the display will read [
27:SIREN ON
LINE
].
or
7. Press
OK I
and make the selection and then press
OK I
to confirm.
The PowerMax10-G2 display will revert to [
27:SIREN ON LINE
].
OK I
SELECT OPTION
OK I
You can now press the or button to program any other menu in
"
DEFINE PANEL
" or press the button to take you to "
<OK> TO EXIT
" .
4.6 Event Reporting Configuration
4.6.1 General
The PowerMax10-G2 system uses an IP platform that supports GSM and GPRS cellular communication and broadband to
forward all events received at the control panel to the monitoring station.
4.6.2 Setup Report Communicators
4.6.2.1 Configuring PSTN / GSM Communicators
1. Make sure the system is disarmed and then press the button
repeatedly until the PowerMax10-G2 display reads
"
INSTALLER MODE
".
2.
When the PowerMax10-G2 display reads [
INSTALLER MODE
] , press
OK I
.
The screen will now prompt you to enter your installer code.
OK I
3. Enter your Installer Code. CODE
4. Press the or button repeatedly until the PowerMax10-G2
display reads [
DEFINE COMM.
] option.
or
5. When the PowerMax10-G2 display reads [
DEFINE COMM.
], press
OK I
.
The PowerMax10-G2 display will read [
1:PSTN/GSM
]
OK I
6.
When the PowerMax10-G2 display reads [
1:PSTN/GSM
] press the
OK I
button.
The PowerMax10-G2 display will read [
AREA CODE
].
OK I
7.
Enter the system tel. area code (up to 4 digits). TEL. AREA CODE
27:SIREN ON LINE
1:PSTN/GSM
ENTER CODE:
AREA CODE
DEFINE COMM.
INSTALLER MODE
READY 00:00
27:SIREN ON LINE
01:ENTRY DELAY 1
ENTER CODE:
INSTALLER MODE
READY 00:00
DEFINE PANEL