Vishay G4, Technical Manual, Page: 77 / 200

G4 Multi Channel Weighing Instrument
3-45
Range/Alternatives Explanation and
<default value> result of alternatives.
Menu ‘Analog Outputs’
NOTE: There are 4 possible analog outputs each with the 8 parameters described
below. If the selected analog output module is AOUT4 there will be parameters for four
analog outputs displayed, if the AOUT1 is selected only the parameters for
the first analog output (shown below) will be shown. If no AOUT module at all is
selected the menu ‘Analog Outputs’ will not be shown.
AOUT1 Source (- AOUT4 Source)
Not in use
Gross Weight
Net Weight
Disp. Weight
Flow Rate
< Not in use > Defines the value to represent on analog output 1.
Not in use: The analog output is not used.
Gross Weight: The output represents gross weight.
Net Weight: The output represents net weight.
Disp. Weight: The output represents gross or net
weight, even if flow rate is displayed.
Flow Rate: The output represents flow rate
AOUT1 Scale (- AOUT4 Scale)
1
2
3
4
5
6
7
8
< 1 > 1: Scale number 1 uses this analog output.
2: Scale number 2 uses this analog output.
….
8: Scale number 8 uses this analog output.
Note: this parameter is not shown if parameter
‘AOUT1 Source’ is ‘Not in use’.
AOUT1 Outp.Type (- AOUT4 Outp.Type)
+/– 20 mA
–12 – 20 mA
0-20 mA
4-20 mA
+/–10 V
0-10 V
<4-20 mA> Defines the type of signal, used to represent
the weight/flow rate value at this Analog output.
+/–20mA, –12 - 20mA: bipolar current output.
0-20mA, 4-20mA: monopolar current output.
+/–10V: bipolar voltage output.
0-10V: monopolar voltage output.
Note: this parameter is not shown if parameter
‘AOUT1 Source’ is ‘Not in use’.
Note that in most cases are some over range available.
+/-20 mA and –12 – 20 mA ranges are limited at -22 and
+22 mA.
4 -20 mA range is limited at +4 and +22 mA.
0 -20 mA is limited at 0 and +22 mA.
+/-10 V is limited at -11 and +11V.
0–10 V is limited at 0 and +11V.