Vishay G4, Technical Manual, Page: 51 / 200

G4 Multi Channel Weighing Instrument
3-19
Range/Alternatives Explanation and
<default value> result of alternatives.
1:Zero Tracking
Off
On
On+AutoZero
<Off> With this parameter automatic zero-tracking can be selected, or
a combination of automatic zero-tracking and automatic zero
setting.
Off: No zero tracking.
On: Zero tracking active.
On+AutoZero: Zero tracking and auto zeroing active.
1:Z-Track.rate
Range:
0 to 1500
Unit: /min
<1> Maximum weight change speed for zero-tracking to be
performed.
‘Zero-track.rate’ must be less than (30 * Resolution). Unit for the
Zero-track rate is: Measurem. unit/min, expressed as ‘ /min’ to
save space.
Note: this parameter is only shown if parameter
‘1: Zero tracking’ is set to ‘On’ or ‘On+AutoZero’.
1:Tare Corr.Mode
Auto
Preset
Auto+Preset
<Auto>
The tare value can be calculated in three different ways:
Net weight = Gross weight – Tare value
Auto: Auto tare value is used.
Preset: Tare value is entered through
the serial communication or keypad.
Auto+preset: Tare value is the sum of
the preset tare value and auto tare value.