Vishay G4, Technical Manual, Page: 75 / 200

G4 Multi Channel Weighing Instrument
3-43
Range/Alternatives Explanation and
<default value> result of alternatives.
Menu ‘Outputs Slot 1’ - ‘Outputs Slot 3’
NOTE: There are three possible sub menus, one for each slot. In each slot sub menu
there are up to 8 possible outputs named 11 to 18 for slot 1, 21 to 28 for slot 2 and so
on. Each output has the parameters described below. Note that output numbering
below only show outputs belonging to slot 1. The ‘Outputs Slot X’ is only shown if there
is a module, with outputs, selected for slot X. The number of displayed outputs is the
number of outputs of the specific module selected in menu ‘Hardware Configuration’.
Outp. 11 Source (- Output 18 Source)
Not in use
In Process
Level
Setpoint
Net Mode
Good Zero
Stable Weight
Flow R.Disp
B. in Progress
Batching Stopped
Batching Alarm
Batch. Activity
< Batch. Activity > Defines the use of the internal digital outputs
in the instrument.
Not in use: The output is not used.
In Process: Active output means active ‘In process’.
Level: Output activated by the Level.
Setpoint: Output activated by the Setpoint.
Net Mode: Output active in net mode.
Good Zero: Output active by ‘good zero’.
Stable Weight: Output active by stable weight.
Flow R.Disp: Output active by flow rate display.
B. in Progress: Output active as batching is in progress (also
when
‘ halted ’ ).
Batching Stopped: Output active as batching is halted.
Batching Alarm: Output active as a batching alarm is present
and has not yet been reset.
Batch. Activity: Output used in a batching activity.
The default setting ‘Batch Activity’ will give the same result, as
setting the ‘Outp. 11 Source’ to ‘Not in use’ unless the output is
used in batching.
Output 11 Scale (- Output 18 Scale)
1
2
3
4
5
6
7
8
<1>
1: Scale number 1 uses the output.
2: Scale number 2 uses the output.
….
8: Scale number 8 uses the output.
Note: this parameter is only shown if parameter
‘Output 11 Source’ is ‘Net mode’, ‘Good zero’, ‘StableWeight’,
‘Flow r. disp’, ‘B. in Progress’, ‘Batching Stopped’ or
‘Batching Alarm’.