Vishay G4, Technical Manual, Page: 60 / 200

Technical Manual
3-28
Range/Alternatives Explanation and
<default value> result of alternatives.
Menu ‘Serial Com.’
Modbus Address
Range: 1 to 247
<1> Defines the instrument Modbus address.
COM1:Mode
Not in use
Modbus Slave
Printer
<Not in use>
Defines use of serial port Com 1.
Not in use: The port is not used.
Modbus Slave: The port is used for control unit communication.
Printer: The port is used for a printer.
COM1:Baudrate
300
600
1200
2400
4800
9600
19200
38400
57600
115200
<9600> Defines the baudrate for the serial communication.
The parameter must be set to the baudrate of
the external equipment.
Note: This parameter is not shown if ‘Not in use’ is selected in
‘COM1:Mode’.
COM1:Data Format
7-none-2
7-even-1
7-even-2
7-odd-1
7-odd-2
8-none-1
8-none-2
8-even-1
8-odd-1
< 8-none-1 > Defines the bit configuration for the serial communication.
The parameter must be set to the same configuration as for the
external equipment.
Note: This parameter is not shown if ‘Not in use’ is selected in
‘COM1:Mode’.
COM1:Min Reply T
Range: 0 to 1000
Unit: ms
<0> Adds a delay before the response to a command is sent. Used if
the instrument sends its response to fast for the master.
Note: This parameter is only shown if ‘Modbus Slave’ is selected
in ‘COM1:Mode’.