Appendix C - Configuring Replication
134
7700 Flash Storage Platform Installation Guide 7.6.3.x
530-0267-00 Rev 02
•
Define a replication policy
•
Define the transfer mode and transmission
1.
To define primary and replica LUNs, select
Manage > Devices
.
2.
Select a 7700 FSP Controller in the Manage Devices panel in the left navigation pane.
A list of available LUNs on the device appears in a table in the main window.
3.
Click to select a LUN from the list as the primary LUN, which highlights the selected LUN row.
4.
Click
Replication
in the menu bar and select
Add Replication
.
The
Add Replication
dialog displays.
5.
Select the
Primary LUN
from the drop down list.
The Primary Controller names appears in the dialog about the Primary LUN name.
6.
Complete the procedural steps in the "Creating a Replication Policy for a LUN" topic in
Symphony Help to configure and create a replication policy for the selected LUN.
Make sure to designate the Replica Controller
rep0
IP address. The Primary Controller will
communicate with the Replica Controller to apply these settings.
Task 4: View Replication Data
1.
To view replication data, select
Manage > Devices
.
2.
Select the 7700 FSP Controller in the Manage Devices panel that you configured as the
primary replica server.
3.
Select the
Replications
tab to display the Replications window showing the entire table of
replication-related status including the following:
•
Primary Controller
•
Primary LUN
•
Replica Controller
•
Replica IP Address
•
Replica LUN
•
Snapshot Group
•
Replication Status
•
Last Sync
•
Next Sync
