Villa Rotograph EVO, Service Manual

Page: 69 / 223

SERVICE MANUAL
Installation
Rotograph EVO (Rev. 1) 6-10
6.4. Mounting of CEPH-arm (Optional)
The CEPH kit can be installed on the machine both during the first
installation and later as updating of the device. In case the
Rotograph EVO is sold already equipped with the Ceph arm, centering
between the X-ray beam and the Sensor will be very quick as the arm is
already adjusted and pinned in the factory.
In case the arm is provided later (unit upgrade), the unit is already pre-
set to accept it, but the centering between the X-ray beam and the
cassette must be performed in the field.
The Ceph device is shipped in a dedicated packaging and is already pre-
assembled in a single piece composed of the following parts:
•
Ceph arm including the handle for installation
•
Skull clamp and ear centering device
•
Arm covers
•
Cassette holder.
Handling zone
Red handle
Figure 6-10
NOTE:
Do NOT remove the handle before the complete installation of the Ceph
arm on the column.
*