Villa Rotograph EVO, Service Manual

Page: 62 / 223

SERVICE MANUAL
Installation
(Rev. 1) Rotograph EVO 6-3
6.2. Column mounting
The column is delivered in a carton box containing the column itself, the
patient support arm and the keyboard. All those parts are fixed to a
wooden palled using two fixing brackets (A); an additional retaining
bracket (B) is fixed at the upper part of the column (Figure 6-2).
Verify the presence of the four adjustment feet in the lower side of the
column.
NOTE:
In case of free standing base version, it is necessary to remove the four
feet before to raise up the column.
Fixing brackets
"A"
Retaining bracket
"B"
Feet grub screws
Figure 6-2
1. Remove the screws used to fix the column to the wooden pallet and
raising it (this operation requires the presence of two persons).
2. With the column in vertical position, remove only the two fixing
brackets "A".
NOTE:
Leave the retaining bracket "B" in place, because it will be necessary for
the following operations of support arm mounting.
*
*