Viglen Dossier XT, User Manual

Page: 64 / 172

Video & Audio Controls
3 - 12 Display Devices
3
To Enable Dual Display Clone Mode:
1. Plug the VGA monitor or TV into the appropriate port/jack (see page 3 - 9 ).
2. Go to the Intel(R) 82852/82855 GM/GME Graphics Controller Properties
control panel (see “Intel Extreme Graphics 2 for Mobile” on page 3 - 6 )
and select Devices (tab).
3. Click the Intel(R) Dual Display Clone icon in the devices tab ( Note : this
option is only available when you have attached a monitor or TV).
4. Choose which device is to be the Primary display, and which is to be
Secondary .
5. Adjust the settings by clicking the Device Settings (button) if necessary.
6. Click Apply > OK and close the control panels.
Figure 3 - 7
Device Settings
(Clone Mode)