manualshive.com logo in svg

Viglen Dossier XT, User Manual

Share
Download
Viglen Dossier XT User Manual Download Page 109

Upgrading The Computer

Overview 7 - 1

7

Chapter 7: Upgrading The Computer

Overview

This chapter contains information on upgrading the computer. Follow the
steps outlined to make the desired upgrades. If you have any trouble or prob-
lems you can contact your service representative for further help. Before you
begin you will need:

• A small crosshead or Phillips screwdriver
• A small regular slotted (flathead) screwdriver
• An antistatic wrist strap

Before working with the internal components you will need to wear an anti-
static wrist strap to ground yourself because static electricity may damage the
components.

The chapter includes:

• Removing the Battery
• Upgrading the Hard Disk(s)
• Upgrading the System Memory
• Upgrading the Optical (CD/DVD) Device(s)

Please make sure that you review each procedure before you perform it.

Warranty Warning

Please check with your
service representative
before undertaking any
upgrade procedures to
find out if this will VOID
your warranty.

Summary of Contents for Dossier XT













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands