Viglen Dossier XT Page 160 User Manual Download

Page: 160 / 172

A - 2

Ports and Jacks

Item

Description

Built-In Microphone

The built-in microphone allows you to record on your computer

Card Reader Port

The card reader allows you to use some of the latest digital storage cards. Push the card
into the slot and it will appear as a removable device.

DC-In Jack

Plug the supplied AC adapter into this jack to power your computer.

External Monitor (VGA)

Port

This port allows you to connect an external monitor, or Flat Panel Display, to get dual video
or simultaneous display on the LCD and external monitor/FPD

(see

“Display Devices” on

page 3 - 9

Headphone-Out Jack

Headphones or speakers may be connected through this jack.

Note

: Set your system’s

volume to a reduced level before connecting to this jack.

Line-In Jack

The Line-In jack allows you to play audio sources through the computer’s speakers.

Summary of Contents for Dossier XT













































































































































































Search results

Summary of Contents for Dossier XT

Reviews:

Related manuals for Dossier XT

Brands by name

Popular brands

Viglen Dossier XT, User Manual

Search results

Summary of Contents for Dossier XT

Reviews:

Related manuals for Dossier XT

Brands by name

Popular brands