manualshive.com logo in svg

Viglen Dossier XT, User Manual

Share
Download
Viglen Dossier XT User Manual Download Page 153

Troubleshooting

Display 9 - 9

9

Display

Problem

Possible Cause - Solution

Nothing appears on
screen.

The system is in a power saving mode

. Toggle the sleep/resume key combination, 

Fn + F3

(see 

“Sleep Button” on page 4 - 8

).

\

The screen controls need to be adjusted.

 Toggle the screen control key combinations 

Fn +

F8/F9

 (see 

“Keyboard Video Controls” on page 3 - 2

). If you’re connected to an external

monitor, make sure it’s plugged in and turned on. You should also check the monitor’s own
brightness and contrast controls.

The computer is set for a different display.

 Toggle the screen display key combination, 

Fn

+ F7

 (see 

“Switching/Enabling Displays (Keyboard)” on page 3 - 9

). If an external

monitor is connected, turn it on.

The screen saver is activated. 

Press any key or touch the 

TouchPad

.

No image appears on the
external monitor I have
plugged in and powered
on.

You haven’t installed the video driver and configured it appropriately from the Control
Panel.

 See 

“Video (Win2000/WinXP)” on page 5 - 8

 for instructions on installing the

driver, and see 

“Intel Extreme Graphics 2 for Mobile” on page 3 - 6

 for instructions on

configuring the video driver.

Summary of Contents for Dossier XT













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands