Victron energy BlueSolar SCC010005000, Manual

Page: 118 / 122

Option 2: Light On/Off
This is a simple load output On/Off option, based on the solar input
voltage of the Controller (= output voltage of the solar panel).
•
When, at dusk, the input voltage of the Controller becomes
lower than the light On voltage (default 0.50V), the load output
is switched on.
•
When, at dawn, the input voltage of the Controller becomes
higher than the light Off voltage (default 0.40V), the load
output is switched off.
•
In order to prevent unwanted switching a confirmation time
(DeT) can be set: default 10 minutes, range 0 – 99 minutes.
Option 3: Light On+Timer
This option allows for a pre-set On-time after dusk and a pre-set
Off-time before dawn.
The dusk and dawn switching moments and confirmation time are set
as under option 2.
The remaining parameters are set as follows:
•
NightTime: initial setting of the night duration, the controller
will subsequently adjust NightTime to the actual duration of
the night.
•
On Time 1: On period after dusk.
•
On Time 2: On period before dawn.