6.
Turn on the main power supply to the tool
(main breaker panel, knife switch, etc.).
7.
Turn the power switch on the side of the
tool to the “ON” position. Ensure that the
selector switch on the side of the tool is in
the “NORMAL” position.
8.
Press the “ENABLE” button.
9.
Depress the safety foot switch momentarily
to ensure that the tool is operational.
WARNING
Grooving rolls can crush or
cut fingers and hands.
• Always turn off the main
power supply to the tool
before making any tool
adjustments.
• Loading/unloading pipe will place your
hands close to the rollers. Keep hands
away from the grooving rolls and the
roller on the pipe stabilizer during
operation.
• Never reach inside the pipe ends or
across the tool or pipe during operation.
• Always groove pipe in a CLOCKWISE
direction.
• Never groove pipe that is shorter than
the recommended lengths listed in this
manual.
• Never wear loose clothing, jewelry, or
anything that can become entangled in
moving parts.
9.
Insert a length of pipe that is the correct size
and thickness onto the lower roll. Ensure that the
pipe end contacts the lower-roll backstop flange
completely. Remove hands from the pipe.
TM-VE268_28
REV_H
TM-VE268
/ Operating and Maintenance Instructions Manual
Summary of Contents for VE268
Page 2: ......
