WARNING
Grooving rolls can crush or
cut fingers and hands.
• Loading/unloading pipe
will place your hands close
to the rollers. Keep hands
away from the grooving
rolls and the roller on the
pipe stabilizer.
4.
Retract the pipe stabilizer, if necessary,
to insert the pipe onto the lower roll by
loosening the locking handle and retracting
the stabilizer roller with the handwheel.
5.
Insert a length of pipe that is the correct
size and schedule over the lower roll.
Ensure that the pipe end contacts the
lower-roll backstop flange. The pipe must
rest directly on top of the roll and must not
be skewed to one side or the other.
6.
Turn the power switch on the side of the
tool to the “ON” position. Turn the selector
switch on the side of the tool to the “JOG”
position.
7.
With the operator on the safety foot switch
side of the tool, use the safety foot switch to
energize the tool motor and bring the upper
roll down into firm contact with the pipe.
Withdraw foot from the safety foot switch.
8.
Remove the guard setting pad from its
stor age hook. Hold the guard setting pad
firmly down against the pipe while pushing
it under the adjustable guards until it
contacts the upper roll.
TM-VE268_20
REV_H
TM-VE268
/ Operating and Maintenance Instructions Manual
Summary of Contents for VE268
Page 2: ......
