5a.
Turn the selector switch on the side of the
tool to the “NORMAL” position. The arm/
upper roll assembly will return to its highest
position.
5b.
Turn the power switch on the side of the
tool to the “OFF” position.
LOWER ROLL REMOVAL FOR 3/4-INCH/
26.9-MM AND 1 TO 1 1/2-INCH/33.7 TO
48.3-MM SIZES
WARNING
• Always turn off the main power supply to
the tool before changing the rolls.
Failure to follow this instruction could result
in serious personal injury.
1.
Turn the power switch on the side of the
tool to the “OFF” position.
NOTICE
• The 3/4-inch/26.9-mm and 1 to 1 1/2-inch/
33.7 to 48.3-mm lower roll assembly is
held in position with left-hand threads
and must be loosened by turning
clockwise.
2.
With a wrench engaged on the square
end of the lower roll assembly, loosen and
remove the lower roll assembly by turning
clockwise
. Store the lower roll assembly in
the tool cabinet.
TM-VE268_31
REV_H
TM-VE268
/ Operating and Maintenance Instructions Manual
Summary of Contents for VE268
Page 2: ......
