XX134-07-00 Rev 908 SurveyorVFT Camera Dome System
9BCompetitive Protocols
•
53
Competitive Protocols
mpetitive protocols. The tables below
utline how to use the functions on Pelco, Sensormatic, Kalatel, Ultrak, Panasonic, Philips and Cohu
should function with any
lex
rotocol to ASCII RS-232 protocol; an RS-232 to RS-422 converter (with external power) is then required to
urveyorVFT in Kalatel mode is simplex 9600, n, 8, 1. SurveyorVFT should
sing Digiplex protocol.
port adapter (RJ-11 connector to 1 x RS
ypad user manual connection diagram.
ak KD6/KD6-Z, release date June 2001.)
557 series and Qlty ICC-11
1. SurveyorVFT should function with most Cohu keypads that utilize Cohu
ce Vicon tested this product with the interfacing equipment. Vicon
commends purchasing a single unit for bench testing prior to purchasing and installing this
product in quantity.
The Vicon SurveyorVFT is designed to store PTZ preset locations on the internal memory. Certain
manufacturers’ controllers are designed to store PTZ preset locations in the controller. Therefore
preset functionality in the Vicon dome will not work correctly with these types of controllers.
The SurveyorVFT Camera Dome can be operated by a number of co
o
keypads.
Testing Conditions
elco:
tested with the MPT9500 Controller and Pelco D protocol. SurveyorVFT
P
Pelco keypad using Pelco D protocol.
Sensormatic:
tested using the AD Tracker 16 via RCSN422 SensorNet to RS422 converter. SurveyorVFT
should function with any Sensormatic (AD) keypad using SensorNet protocol.
alatel:
tested with KTD-404, which requires a protocol converter KTD-410 to convert Kalatel’s Digip
K
p
connect the SurveyorVFT. The S
function with any Kalatel keypad u
Ultrak:
tested with KEGS5000 keypad, which requires Ultrak control
85 and 1x RS-232 ports). For detailed information refer to Ultrak ke
4
Keypad communication interface is RS-485: 9600 baud. The SurveyorVFT in Ultrak mode is simplex with
event parity.8.1
.
SurveyorVFT should function with most Ultrak keypads using Ultrak KD6/KD6-Z protocol.
(
Version of the supported protocol: Ultr
Panasonic:
tested with WV-CU161 keypad, which does not require any port adapters. For detailed
information refer to Panasonic keypad user manual connection diagram. Set keypad communication protocol
to RS-485: 9600 baud, duplex, data bit 8, parity NONE, and stop bit 1. SurveyorVFT should function with
most Panasonic keypads that utilize Panasonic WV-CS850(A) ver 3.0 protocol. (
Version of the supported
protocol: Panasonic WV-CS850(A) ver 3.0, release date October 2001.)
hilips:
Tested with LTC-5136 series keypad, which requires Bosch LTC 8
P
converters (both converters must be self powered) to resample the signal from RS-232 to RS-422 protocol.
For detailed information refer to Philips keypad user manual and converters user manuals. To enable Philips
protocol set SurveyorVFT SW2 DIP switch 7 to ON position. Switches 2-6 and 8 must be set to OFF.
Communication with the SurveyorVFT using Philips protocol is supported at RS-422: 9600 baud, data bit 8,
parity NONE, and stop bit is 1. SurveyorVFT should function with most Philips keypads using Philips
AutoDome TC8560/TC700 protocol. (
Version of the supported protocol: Philips AutoDome TC8560/TC700
eries Release Date: March 2000.
)
S
Cohu:
Tested with WinMPC v4.2 software application, which requires Black Box RS 232 to RS 422 interface
converter. For detailed information on wiring diagram refer to Cohu iDome user manual. To enable Cohu
protocol set SurveyorSVFT SW2 DIP switches 5 and 7 to ON position. Switches 2, 6 and 8 must be set to
OFF. Communication with the SurveyorVFT using Cohu protocol is supported at RS-422: 9600 baud, data bit
8, parity NONE, and stop bit is
iDome/iView/LCU
protocol. (
Version of the supported protocol: Cohu iDome/iView/LCU Communication
Protocol – Rev 3.0. Release Date: March 2004.
)
Note: All companies make changes and improvements in their products. Because this product can
interface with equipment not manufactured by Vicon, there is a possibility that the interface protocols
ay have changed sin
m
re
Summary of Contents for SVFT-C22
