48
•
6BConfiguration
XX134-07-00 Rev 908 SurveyorVFT Camera Dome System
ViconNet Configuration
After the camera dome has been setup with the proper IP address, configuration features from a remote
workstation, server or recorder are available as follows.
•
A network settings screen is used to modify the camera dome’s IP parameters. This allows great
flexibility in network setup.
Note: This setup can be performed from any VN-WS/VN-NVR workstation connected to the IP dome and to
the Nucleus or from a Kollector Elite.
1.
Verify that the camera is connected to the network, that it is active and that it is configured to use the
same
Nucleus.
2.
From the workstation desktop, run the ViconNet application.
3.
After logging in, open the site setup selection window.
4.
Select the IP dome camera setup.
5. Open
the
Network Setup and Site Name
setup window.
Network Settings
window will display.
See Figure below.
6.
Change the required parameters and click OK. (See your IT administrator for specific network
parameters.) Application of the camera will restart.
Network Settings Window
•
An Authorization screen is used to establish authority levels, by user group. Functions such as PTZ
and video view, record and playback can be set for authority level.
•
A priority screen is used to establish video quality and FPS levels.
ViconNet (IP/LAN) Version Operation
The following functions are supported by the ViconNet system through a workstation, recorder or server.
1. System macros can be configured to view and record the dome’s video. In addition, within macros,
alarms can be sent and remote macros triggered.
2. An alarm can be triggered upon video motion detection and video loss. This alarm can be sent remotely
to other networked units.
3. PTZ control can be performed from any networked workstation, recorder or server. Authorization for PTZ
can be assigned to specific operator levels.
Refer to the ViconNet workstation manual XX113 for complete information on operation. A copy of the
manual can be found on the CD included.
Summary of Contents for SVFT-C22
