VibroSystM ZPU-5000, User Manual

Page: 5 / 46

3. OPERATION 28
3.1 Startup (boot-up sequence) 28
3.2 Using the keypad 30
3.3 Overview of the display in monitoring mode 31
3.3.1 View spectral band parameters 32
3.3.2 View air gap parameters 33
3.4 Overview of the options in the Menu mode 34
3.4.1 Import a configuration 35
3.4.2 Export a configuration 35
3.4.3 View information about VibroSystM 36
3.4.4 View the ZPU-5000 system information 36
3.4.5 View the modules information 36
3.4.6 Export alarms 36
3.4.7 View or acknowledge alarms 36
3.4.8 Acknowledge all alarms 36
3.4.9 View System OK information 36
3.4.10 Adjust the front panel brightness 37
3.4.11 Change the power saving option 37
3.4.12 Attribute a unit address 37
3.4.13 Change the IP address protocol (enable or disable DHCP) 37
3.4.14 View or edit communication port settings 37
3.4.15 Select the Network or Standalone mode 38
3.4.16 Create access codes and attribute access rights 38
3.4.17 View or delete existing access codes assigned to users 39
3.4.18 Export log files 39
3.4.19 Restart the unit 40
3.4.20 Uninstall the firmware 40
3.5 Firmware update to version 7.4 with a prepared USB key 40
4. CONFIGURING THE ZPU-5000 WITH ZOOM SOFTWARE 42
4.1 Module firmware and spectral analysis processing 42
4.2 Processes for Trend outputs 42
5. TROUBLESHOOTING 43
5.1 Power supply 43
5.2 Boot-up 43
5.3 Network connection 43
5.4 Analog input/output modules 44
5.5 CTRL-100 module 45
ZPU-5000 Acquisition and Processing Unit with ZOOM Version 7.4 - User’s Manual 5