2.1.2 Installing modules in the ZPU-5000 unit
Modules of the correct type must be placed in the correct slots. Slot 9 is dedicated to the Control module, and
slot 10 is dedicated to the Communication module. Slots 1 to 8 are reserved for Analog I/O modules and the
location of each must match the ZPU-5000 Hardware Configuration form.
To install a module, carefully align the module in the
top and bottom guide rails, push the module in the
ZPU-5000, and tighten the two thumb screws.
ZPU-5000 Acquisition and Processing Unit with ZOOM Version 7.4 - User’s Manual
15
