Viavi T-BERD 6000A V2, User Manual

Page: 101 / 188

Chapter 10 File management
Working with directories and files from the explorer
User Manual 76100000200 Rev. 001 81
3 In the address bar, type the following address (
10.33.17.113
,
being the IP address of the 6000A V2 Platform defined when the
connection was configured;
ftp://mts6000:acterna@10.33.17.113/disk/
This allows to access to internal memory.
ftp://mts6000:acterna@10.33.17.113/usbflash/
This allows to access to the contents of the USB memory stick
connected to the 6000A V2 Platform.
4 If an identification is required, enter:
–
User name: mts6000
– Password: acterna
The PC then displays the contents of the internal memory or of the
USB memory stick from the 6000A V2 Platform.
5 If internal memory of the Platform is accessible via Internet Explorer
(or any other explorer), right click on one file and click on
Save
target as... to transfer file onto the PC.
If internal memory of the Platform is accessible via Windows
Explorer,
select one / several files and click on Copy , then click on
Paste on PC to transfer file
.
Sending files by
mail
The 6000A V2 Platform can send files (traces or others) via e-mail, from
the Explorer.
If you use Internet Explorer 7, the following address must be entered:
ftp://mts6000:acterna@10.33.17.113/acterna/user/disk
or
ftp://mts6000:acterna@10.33.17.113/acterna/user/usb
-
flash
Fig. 48 Internal memory of the 6000A V2 Platform
Internal memory open via Internet Explorer
Internal memory open via Windows Explorer