Viavi T-BERD 6000A V2, User Manual

Page: 160 / 188

Chapter 16 Maintenance and Troubleshooting
Maintenance procedure
140 User Manual 76100000200 Rev. 001
6 Set back the module pack onto the base pack
7 If necessary plug the equipment to charge the battery
8 Switch on the 6000A V2 Platform.
9 Press F
ILE
hard key to display the explorer, with the new drive «hard
disk» on the left of the screen
If the hard disk has not been detected, turn off the instrument and
check the installation of the hard disk into the base.
Installing the WIFI
or Bluetooth
option
If the option WIFI or Bluetooth is delivered after the platform delivery, the
customer needs to install himself the option into the equipment.
1 Proceed as described from step 1 to step 4 in the chapter
“Changing the module carrier” to remove the pack Base from the
module.
2 Open the cover of the optical options (see Figure 88 on page 140 ).
3 Install the option wished, WIFI or Bluetooth, in the connector.
Fig. 88 Location for the hard disk and WIFI/Bluetooth
options
Hard disk
Cover of the
Hard disk
Location for WIFI/
Bluetooth options
Cover of the WIFI/
Bluetooth options