Viavi T-BERD 6000A V2, User Manual

Page: 84 / 188

Chapter 9 Transferring the 6000A V2 Platform Interface
Establishing connection
64 User Manual 76100000200 Rev. 001
Establishing connection
The connection between 6000A V2 Platform and the PC can be done
directly, or via a local network.
The transfer of the interface can be done using a VNC window on PC.
Connecting the
6000A V2
Platform and
the PC
1 Connect the 6000A V2 Platform to the PC via an Ethernet cable,
using the RJ45 connectors set on both equipments.
2 Check the network connection on the PC is set in Dynamic mode.
Configuring the
6000A V2
Platform
1 In the Home page, press System Settings menu key.
2 In the System Settings page, in the I/O Interfaces box, configure
the following parameters:
Remote Screen
Remote screen = Session or Permanent must be confirmed in both
cases, in the Interface E/S window .
No the screen cannot be remote on to a PC or on to
another 6000A V2 Platform.
Session Mode the Remote screen function is inactive once the
6000A V2 Platform is switched off.
Fig. 34 Connection 6000A V2 Platform and PC
NOTE
The transfer of interface can be done via WIFI, using the IP address
once WIFI connection is established (see
Chapter 12 “WIFI Option”
page 109 ).
It can also be transferred via Bluetooth, on a laptop PC equipped with
Bluetooth (see
Chapter 13 “Bluetooth option” page 117 ).