Viavi T-BERD 6000A V2, User Manual

Page: 165 / 188

Chapter 16 Maintenance and Troubleshooting
Maintenance procedure
User Manual 76100000200 Rev. 001 145
4 According to your region, click on the one of the following icon to
download the archive.
Download from European server
Download from North American server
Download from Singapore server
5 In the new dialog box displayed, click on Save to save the exe file
on the PC.
6 Once completed, connect the USB memory stick to the PC and
follow the instructions chapter
“Installation from a USB memory
stick” on page 147 , from step 2 .
Installation from
Viavi Server
The update can be performed directly onto the equipment, using the
Viavi server.
1 Connect the 6000A V2 Platform to a PC via an Ethernet link.
2 On the Home page, press System Settings key to open the
System Settings page.
3 In I/O Interfaces , on the line Ethernet , select Mode : Dynamic .
4 In the Upgrade Server box:
– On the line Address Type , select Viavi Server
The address 6k.updatemyunit.net is automatically displayed.
5 Select if the new release for 6000A V2 Platform must be automati-
cally detected (
Enable ) or not ( Disable ). See “Checking new
upgrade on Viavi Server” on page 148 .
6 In the I/O Interfaces box:
– On the line Use proxy , select No , Manual or Auto wether a
proxy is used or not.
7 Press menu key Exit to return to Home page.
8 Press, in succession the menu keys: Expert Tools > Upgrades >
Software Upgrade > Upgrade via Ethernet .
The message
Verify IP address of PC server
appears.
9 Click on Continue .
Fig. 93 Configuration of the Viavi Server