Viavi T-BERD 6000A V2, User Manual

Page: 81 / 188

Chapter 8 Stratasync
Configuring and synchronizing the 6000A V2 Platform
User Manual 76100000200 Rev. 001 61
Configuring and synchronizing the 6000A V2 Platform
The 6000A V2 Platform can be configured to be synchronized with the
Stratasync.
1 Press Settings in the Home page
2 Check the configuration of the Ethernet and Proxy parameters.
3 Configure the Stratasync parameters:
a In the Server Type parameter, the Viavi Server is selected by
default and it is recommended to keep this parameter.
However, the user can select if necessary the
Server Name
parameter and enter the name in the following parameter.
b In the Account ID parameter, enter the same identifier as the
one used to access to Stratasync.
c The Technician ID parameter is automatically fulfilled after
synchronization (if it has been defined by the administrator of
the Stratasync)
d To upload the files from a directory onto the 6000A V2 Platform
toward Stratasync, select the parameter
Upload from and press
right arrow key to enter the directory path (example:
disk/
Stratasync
). The directory Stratasync is defined by default.
Fig. 32 System Settings - Stratasync
3
2