Viavi T-BERD 6000A V2, User Manual

Page: 99 / 188

Chapter 10 File management
Working with directories and files from the explorer
User Manual 76100000200 Rev. 001 79
2 Make sure the network configuration onto the PC is set to the
Dynamic mode:
a Click on Start > Control Panel .
b Double click on Network Connection .
c Double click on Local Area Connection .
d In the dialog box, click on Properties .
e Check the parameter Internet Protocol (TCP/IP) is selected
( ) and click once on it (underlined in blue)
f Click on Properties button.
g On the tab General , check the parameter Obtain an IP address
automatically is selected ( ); if not, click to select it.
h Click on Ok and close all the dialog boxes opened onto the PC.
3 On the 6000A V2 Platform, in the System Setup page, under I/O
interface > Ethernet , select Dynamic .
Fig. 45 Ethernet Connection 6000A V2 Platform <-> PC
Fig. 46 Internet Protocol
Ethernet cab
le