Viavi T-BERD 6000A V2 User Manual Download Page 20

Page: 20 / 188

About This Guide

Conventions

User Manual

76100000200 Rev. 001

Table 4

Safety definitions

This symbol represents a risk of electrical shock.

NOTE

This symbol represents a Note indicating related information or tip.

This symbol, located on the equipment or its packaging
indicates that the equipment must not be disposed of in a land-
fill site or as municipal waste, and should be disposed of
according to your national regulations.

WARNING

Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.

Summary of Contents for T-BERD 6000A V2





























































































































































































Search results

Summary of Contents for T-BERD 6000A V2

Reviews:

Related manuals for T-BERD 6000A V2

Brands by name

Popular brands

Viavi T-BERD 6000A V2, User Manual

Search results

Summary of Contents for T-BERD 6000A V2

Reviews:

Related manuals for T-BERD 6000A V2

Brands by name

Popular brands