41
events.
Tamper Alarm
Away Arm:
Tamper alarm will only be activated when tamper switch is triggered under
Away Arm mode (Tamper event will still be reported normally in Home/Disarm mode).
Always:
Tamper alarm will be activated whenever tamper switch is triggered.
Entry Timer Extend
Off:
When set to Off, if an Entry Delay countdown is activated and the Control Panel is not
disarmed before the countdown timer expires, the Control Panel will report a burglar alarm
immediately when the Entry Delay time expires.
On:
When set to On, if an Entry Delay countdown is activated and the Control Panel is not
disarmed before the countdown timer expires, the Control Panel will wait for another 30
seconds after Entry Delay time has expired before reporting a burglar alarm.
Entry1 Delay
Set the Entry Delay Timer 1 for Away Arm and Home Arm modes. When a device set to
Entry 1
attribute is triggered under arm mode, the Entry Delay Timer will begin to countdown.
The system must be disarmed before the timer expires or an alarm will be activated. (Please
refer to 5.3.3.4 Edit Device for more information)
Entry2 Delay
Set the Entry Delay Timer 1 for Away Arm and Home Arm modes. When a device set to
Entry 2
attribute is triggered under arm mode, the Entry Delay Timer will begin to countdown.
The system must be disarmed before the timer expires or an alarm will be activated. (Please
refer to 5.3.3.4 Edit Device for more information)
Exit Delay
Set the Exit Delay Timer for Away Arm and Home Arm modes. When you arm the system, the
system will enter your selected arm mode after the Exit Delay Timer expires.
Alarm Length
When an alarm is activated, both the Control Panel siren and external siren will raise alarm
according to the Alarm Length setting.
Supervision Timer
Set the supervision timer for accessory devices, if no supervision signal is received within set
duration for a certain device, the Control Panel will report the situation accordingly.
Sound Setting
Chime:
If not disabled, the Control Panel will sound a door chime sound when a Sensor
with Chime function enabled is activated in Disarm mode.
Entry Arm:
If not disabled, the Control Panel will sound beeping sounds when a Door
Contact set to Entry attribute is activated in Away Arm mode. .
Entry Home:
If not disabled, the Control Panel will sound beeping sounds when a Door
Contact set to Entry attribute is activated in Home Arm mode. .
Exit Arm:
If not disabled, the Control Panel will sound beeping sounds when during Exit
Delay Timer for Away Arm mode.
