Vesta BOGP-3 User Manual Download Page 23

Page: 23 / 70

Step 4.

According to the condition selected, set

the detail of the condition and press

to confirm.

Mode Change

The rule will be activated when the Control
Panel enters selected mode.

Alarm

The rule will be activated when the selected
alarm is triggered.

Greater Temp.

The rule will be activated when the
temperature rises above set temperature.

Greater Temp. Zone

The rule will be activated when the
temperature of the selected temperature
sensor rises above set temperature.

Lower Temp.

The rule will be activated when the
temperature drops below set temperature.

Lower Temp. Zone

The rule will be activated when the
temperature of the selected temperature
sensor drops below set temperature.

Timer (Daily)

The rule will be activated according to set time
every day.

Timer (Weekly)

The rule will be activated according to set
weekday time.

Initial.

The rule will be activated when the Control
Panel is powered up.

Any Alarm

The rule will be activated when the any alarm
is triggered

Step 5.

Set the action to be executed when the

condition is met and press

confirm.

E m p t y
A

l y

Step 6.

According to the action selected, Set

the detail of the action you want to
take.

Apply Scene

The selected scene number will be activated.

Summary of Contents for BOGP-3







































































Search results

Summary of Contents for BOGP-3

Reviews:

Related manuals for BOGP-3

Brands by name

Popular brands

Vesta BOGP-3, User Manual

Search results

Summary of Contents for BOGP-3

Reviews:

Related manuals for BOGP-3

Brands by name

Popular brands