40
Backup:
Click “
Backup configuration by saving as file
” to download your current panel
configuration as a .bin file into your computer.
Restore:
Select the saved .bin file in your computer, then click “
Restore
” to restore your
panel configuration according to the file.
<NOTE>
Two-way radio devices which have been learnt into another Control Panel or put to reset
cannot be controlled after restoring panel configuration.
5.3.2.4. Area
This page is for you to configure area settings.
Final Door
Final Door On:
When the system is Away Armed with a Door Contact set to
Entry
attribute, the system will automatically arm the system once the Door Contact is closed
even if the entry delay timer has not expired yet.
Final Door Off:
When the system is Away Armed with a Door Contact set to
Entry
attribute, the system will only arm the system after the entry delay timer expires.
Arm Fault Type
Confirm:
When set to
Confirm
, If you attempt to arm when a fault exists within the
system, the arming action will be prohibited, and a message will be displayed “Fault
exists! Please Confirm!” You need to arm the system again to confirm your action and arm
the system.
Direct Arm:
When set to
Direct Arm
, If you attempt to arm when a fault exists within the
system, the system will enter selected arm mode without further notification about fault
