54
by selecting “Off” and click “Test” again.
<NOTE>
When you are changing Siren batteries or moving Siren mounting location, you need to
first deactivate the siren by selecting Bypass is siren edit screen, then turn off the Siren
Tamper to avoid accidental tamper trigger.
5.3.4. Captured Events
Pictures captured by PIR Camera will be displayed in this page. Only the pictures of the 6 latest
events will be stored.
Click on the image or video to view the file.
Time:
The time when the picture/video is captured.
Device:
The Zone number of the PIR Camera/Video Camera triggered.
Type:
The type of the image/video.
Alarm Image:
When triggered under Away Arm/Home Arm mode, the PIR Camera will
take three pictures.
Requested Image:
You can manually request the PIR Camera to take one picture.
Status:
The staus of the captured event are listed as follows:
Waiting for Media Ready:
The PIR Camera has captured image and will send the image
to Control Panel after the file is ready. For Alarm Image, if you disarm the Control Panel
under this status, the captured image will be deleted and no image/picture will be sent.
Waiting for Capture:
The PIR Camera is sending captured picture the the Control Panel.
For Alarm Image, if you disarm the Control Panel under this status, the captured image
will be deleted and no image/picture will be sent.
Upload:
The PIR Camera has finished sending image/picture to Control Panel. The
Control Panel is now uploading the image/video to programmed destination.
Done:
The Control Panel has finished uploading image successfully
Fail:
The PIR Camera was unable to send captured image/picture to Control Panel.
Please check if the PIR Camera is out of order or under Low Battery, then perform Walk
