30
key to exit fault display.
<NOTE>
The Control Panel is capable of
detecting following fault events:
Control Panel Low Battery
Sensor Out-of-order
Sensor Low Battery
Device and Panel Tamper
Interference Detection
GSM-Related Failure
4.14. Battery Level
This option is for you to check the battery level:
Step 1.
Select
Battery Level
, press OK to
confirm. The screen will display:
B a t t e r y L e v e l
1 0 0 %
The battery level can also be check when using
Home Portal Server.
4.15. Factory Reset
You can clear all programmed settings and
learnt in devices for the Control Panel and
return all configuration to factory default by
following the below steps
Step 1.
Power down Control Panel.
Step 2.
Apply power to the control panel.
Step 3.
Press
key within 10 seconds after
power on the panel.
Step 4.
The Control Panel firmware version will
be displayed.
Step 5.
To factory reset the panel, press the
following keys:
, then
OK
key to confirm
Step 6.
Select Factory Reset on the LCD
screen press
OK
to confirm.
Step 7.
Factory Reset is now complete.
<NOTE>
All learnt in devices will be removed
after factory reset, you need to re learn-
in the devices again.
If you want to reset system setting
without removing learnt-in devices,
please use the
System Reset
function
in Installer Menu.
