8
Temporary Code
The Temporary Code is designed for the
use of occasional visitors. It has the
same authorization level as the User PIN
Code, but will be removed after one
arming and disarming action.
Duress Code
The Duress Code is specially designed
for situation when the user is under
personal threat. It has the same level of
authorization as User PIN Code, however
when a Duress Code is entered, the
Control Panel will send a silent alarm
report to notify that the user is being
threatened or held against his will.
1.7. System Basic Operation
When idle, the Control Panel is in stand-
by mode. It will wake up when any key is
pressed. After 5 seconds of inactivity, the
Panel will automatically enter stand-by
mode.
While entering PIN code, if incorrect
codes have been entered for 5 times
within 10 minutes, the keypad input will
be prohibited for 15 minutes.
When entering information for system
configuration, press key to to leave
current screen, no information will be
saved.
When under user/programming/installer
menu, if no keys are pressed within 2
minutes. the Control Panel will
automatically exit the menu and return to
disarm mode.
When DC Jack is connected to power
source, GSM will be activated
automatically, and GSM module will be
able to receive SMS commands
whenever it is opened. However, when
power from DC Jack is interrupted, and
the panel switches to battery power, the
GSM will only be activated when the
Panel needs to send a report.
<NOTE>
The following events will trigger a
report: Arm/Disarm/Alarm/Auto-check-
in.
If the Control Panel lost power supply.
When the power is restored, it will
resume its previoius mode.
When programming settings, refer to the
following tables to enter symbols and
alphabets, press the key repeatedly until
the desired symbol/alphabet appears.
1
1
，
！
？
－
【
】
@ /
2
2 A B C a b c
3
3 D E F d e f
4
4 G H I g h i
5
5 J K L j k l
6
6 M N O
m n o
7
7 P Q R S p q r s
8
8 T U V t u v
9
9 W X Y Z w x y z
0
0 <space> /
－
＆
’
.
＋︰
Delete character and backspace
