Vesta BOGP-3 User Manual Download Page 55

Page: 55 / 70

Test to check signal strength.



Timeout:

The PIR Camera did not respond to Control Panel. Please check if the PIR

Camera is out of order or under Low Battery, then perform Walk Test to check signal
strength.

<NOTE>



If a PIR Camera is triggered when the system is armed. Do not disarm the alarm system

before the status displays “Upload” or “Done.” Otherwise the image will be deleted and
will not be sent to Control Panel.

5.3.5. History Records

5.3.5.1 History

The Control Panel history events are recorded in this page.



The History memorizes the last 250 Panel events including:



All Alarm Events with Device Zone



All Fault Warning Events from Panel or Device



All Arming And Disarming Events by Panel and Remote Controller



All Arming and Disarming Events by Remote Keypad with User

information.



Time:

The time when the event take place



Device :

The device that triggered the event



User:

The user who perform the event action



Event:

The event content

Summary of Contents for BOGP-3







































































Search results

Summary of Contents for BOGP-3

Reviews:

Related manuals for BOGP-3

Brands by name

Popular brands

Vesta BOGP-3, User Manual

Search results

Summary of Contents for BOGP-3

Reviews:

Related manuals for BOGP-3

Brands by name

Popular brands