VESPA GTS Super 125 i.e. (2009), Service Manual

Page: 46 / 234

Replacement
-Remove the oil filler cap « A ».
- Unscrew the oil drainage cap « B » and drain out
all the oil.
- Screw in the drainage cap again and fill the hub
with the prescribed oil.
Recommended products
AGIP ROTRA 80W-90 Rear hub oil
SAE 80W/90 Oil that exceeds the requirements of
API GL3 specifications
Characteristic
Rear hub oil
Capacity approximately 250 cc
Locking torques (N*m)
Hub oil drainage screw
15 to 17 Nm
Air filter
Proceed as follows:
1. unscrew the fixing screw « A ».
2. unscrew the nut « B » under the body.
3. remove the left side fairing.
4. remove the helmet compartment;
5. unscrew the fixing screws « C » that can be
reached once the helmet compartment has been
removed;
6. Unscrew the screws « D » and remove the air fil-
ter cover.
Remove the filtering element and clean it with wa-
ter and shampoo; then dry it with a clean cloth and
short blasts of compressed air. Finally, immerse it
in a mixture of 50% oil of the recommended type
and 50% petrol. Then gently squeeze the filter el-
ement between your hands, allow it to drip and
then refit it. Oil or water deposits in the filter hous-
Maintenance
Vespa GTS Super 125 i.e. (2009)
MAIN - 46