Vertical MBX IP User Manual Download

Page: 67 / 70

Using a Bluetooth Wireless Headset (IP-8024 only)

B-5

Appendix B: IP PHONES

MBX IP Station User Guide

To check BTU paired information:

1. Press the [TRANS/PGM] button,
2. Dial 63,
3. Dial 3,
4. Press the OK Soft button.

To use the BTU headset:

1. Press the [SPEAKER] button,

2. Press the "Call Start" button on the BTU headset,
3. Place call as you normally would.

To answer a call with the BTU headset:

1. When an incoming call is received, ringing will be present at the Station and the BT

headset,

2. Press the BT "Call Start" button, or press the [SPEAKER] button,

3. Lift the handset.

NOTE

When the BTU is used for a call, the [SPEAKER] button LED will illuminate and the

speaker mode cannot be used. If the phone handset is taken off-hook while in BT

mode, the voice path will directly be connected to the handset; press the

[SPEAKER] button to activate the BTU headset.

Release 1.7

April 2012

Summary of Contents for MBX IP







































































Search results

Summary of Contents for MBX IP

Reviews:

Related manuals for MBX IP

Brands by name

Popular brands

Vertical MBX IP, User Manual

Search results

Summary of Contents for MBX IP

Reviews:

Related manuals for MBX IP

Brands by name

Popular brands