Vertical MBX IP User Manual Download

Page: 3 / 70

Vertical Communications, Inc. reserves the right to revise this publication and to make

changes in content without notice.

This publication contains proprietary and confidential information of Vertical Communica-

tions, Inc. The contents of this document may not be disclosed, copied or translated by third

parties, in any form, or by any means known, or not now known or conceived, without prior

explicit written permission from Vertical Communications, Inc.

LIMIT OF LIABILITY/DISCLAIMER OF WARRANTY
Vertical Communications, Inc. makes no representation or warranties with respect to the

accuracy or completeness of the content of this publication and specifically disclaims any

implied warranty of merchantability or fitness for any particular purpose, and shall not be

liable for any loss of profit or any other commercial damage, including but not limited to,

special, incidental, or consequential.

TRADEMARKS
Vertical Communications and the Vertical Communications logo and combinations thereof

are trademarks of Vertical Communications, Inc. All other brand and product names are

used for identification only and are the property of their respective holders.

RESTRICTED RIGHTS LEGEND
Use, duplication, or disclosure of the technical data contained in this document by the Gov-

ernment is subject to restrictions as set forth in subdivision (c) (1) (ii) of the Rights in Tech-

nical Data and Computer Software clause at DFARS 52.227-7013 and/or in similar or

successor clauses in the FAR, or in the DOD or NASA FAR Supplement. Unpublished

rights reserved under the Copyright Laws of the United States. Contractor/manufacturer is

Vertical Communications, Inc., 10 Canal Park, Suite 602, Cambridge, MA 02141-2249.

Release 1.7

April 2012

Summary of Contents for MBX IP







































































Search results

Summary of Contents for MBX IP

Reviews:

Related manuals for MBX IP

Brands by name

Popular brands

Vertical MBX IP, User Manual

Search results

Summary of Contents for MBX IP

Reviews:

Related manuals for MBX IP

Brands by name

Popular brands