Vertical MBX IP, User Manual

Page: 65 / 70

Using the Speakerphone B-3
Appendix B: IP PHONES
MBX IP Station User Guide
Using the Speakerphone
Activate the MBX IP Speakerphone at any time (except for Paging) in place of lifting the handset
to receive or place calls.
Additionally, you may switch between the handset and Speakerphone during a call. By keeping
the handset Off-hook, the
Group Listen
feature is activated, which provides incoming audio
over the speaker with outgoing audio from the handset. This permits a local 'group' to listen to
both sides of the conversation without interfering with the conversation.
While in a conversation using the Speakerphone,
Mute
the microphone using the [MUTE]
button. When Mute is active, the [MUTE] button LED will be illuminated. To turn off
Mute
, press
the [MUTE]button again.
With Auto Speaker Select, activating or accessing a feature by pressing its button will activate
the Speakerphone automatically.
When using a Headset, the [SPEAKER] button controls the ON/OFF-hook state for the phone.
To use the Speakerphone to answer or place a call:
Press [SPEAKER], the phone goes off-hook and sends audio to the speaker and the
microphone.
To control the volume of the Speakerphone or handset:
Press the [VOLUME Up/Down] button.
To Mute the microphone:
Select the [MUTE] button.
To turn off Mute (turn the microphone ON):
Press the [MUTE] button.
To activate Group Listen while on an active handset call:
Press the [SPEAKER] button.
Release 1.7 April 2012