3
Identify the four SAS-3 ports in each Primary Shelf controller.
The left-hand controller is labeled A and the right-hand controller is labeled B.
The ports in each controller are labeled 3, 2, 1, and 0 from left to right.
Note:
The colors of the cables in the following diagrams are for demonstration
purposes only.
4
Connect the cables as follows:
Note:
The blue tabs on the SAS-3 cables that are attached to the SAS expander
in slot 7should point up and the blue tabs on the SAS-3 cables attached to the
SAS expander in slot 3 should point down.
■
Connect slot 3, Port 3 of the compute node to controller B, Port 1 on the
Primary Shelf.
■
Connect slot 3, Port 2 of the compute node to controller A, Port 1 on the
Primary Shelf.
■
Connect slot 7, Port 0 of the compute node to controller B, Port 0 on the
Primary Shelf.
58
Hardware installation procedures
Connecting the hardware to one compute node
