5
Identify the release latch in the middle of the top of a blank carrier.
6
Push the release latch to the right. A yellow line appears to the left of the latch
when the disk is unlocked.
7
Start at the front row of the bottom drawer.
8
Locate slot 42 at the front left corner of the drawer.
9
Insert one disk drive into slot 42 and into each slot in the first row.
10
Insert the carrier into the slot and push it down until it stops.
11
Place one thumb on each of the two pads that are shown by the red arrows.
46
Hardware installation procedures
Installing disk drives and blanks into a half-capacity storage shelf
