Verilink WANsuite 6450, Reference Manual

Page: 122 / 205

4-14 W A N s u i t e 6 4 5 0
Figure 4.13 Span Endpoint Details Screen
Vendor ID Vendor ID as reported in an Inventory Response message.
Model Number Vendor model number as reported in an Inventory Response message.
Serial Number Vendor serial number as reported in an Inventory Response message.
EOC Software Version Vendor EOC version as reported in a Discovery Response message.
Standard Version Version of the SHDSL standard implemented as reported in an Inventory
Response message.
List Number Vendor list number as reported in an Inventory Response message.
Issue Number Vendor issue number as reported in an Inventory Response message.
Software Version Vendor software version as reported in an Inventory Response message.
Equipment Code Equipment code conforming to ANSI T1.213, Coded Identification of
Equipment Entities.
Transmission Mode
Capability
Transmission mode capability of the SHDSL unit.
Endpoint Side Defines which direction the SHDSL port is pointing. Normal operation will
use the TU-R configuration, and the endpoint will be “Network.” When unit
type is TU-C, endpoint will be “Customer.”
Wire Pair Always “Wire Pair 1.”
Selecting the “Maintenance” prompt from the Span Endpoint Details screen will
display the screen shown in Figure 4.14. This table supports maintenance
operations (e.g., loopbacks) to be performed on segment endpoints.