Verilink WANsuite 6450, Reference Manual

Page: 37 / 205

W e b S e r v e r I n t e r f a c e 3-9
To set any configuration profile parameter, enter the desired value/information
in a field or select the desired parameter from one of the pull-down lists, and
then click on the “Submit” button.
Alarm Profile Table Screen
Clicking on the “Alarm Profiles” button on the Network screen will display
the screen shown in Figure 3.7.
Figure 3.7 Alarm Profile Table Screen
The Alarm Profiles screen displays the current values of SHDSL alarm
thresholds. Click on the specific hyperlink under “Profile Name” to configure
the alarm threshold values to be used for the selected segment endpoint in the
“Alarm Profile Details” screen shown in Figure 3.8.
Figure 3.8 Alarm Profile Details Screen
Loop Attenuation Sets the loop attenuation alarm threshold. If the current value reaches or
exceeds this threshold, a crossing trap is generated. A value of 0 (zero)
disables the trap.
SNR Margin Sets the Signal-to-Noise Ratio margin alarm threshold. When the current SNR
value reaches or drops below this threshold, a crossing trap is generated. A
value of 0 (zero) disables the trap.
ES Sets the threshold for the number of Errored Seconds within any given 15-
minute performance data collection interval. If the value of ES in a particular