Verilink WANsuite 6450, Reference Manual

Page: 73 / 205

W e b S e r v e r I n t e r f a c e 3-45
Figure 3.37 All Traffic Meter Stats (All Intervals) Screen
SNMP
The unit detects and reports E1 network alarms and provides several options
for reporting them, one of which is SNMP traps. When a network alarm
occurs, the unit sends a trap message to as many as eight destinations on your
network. The unit will report each alarm by transmitting an SNMP “trap” to
each non-zero Trap IP Address. The SNMP Details screen (Figure 3.38) lets
you configure the SNMP parameters described below.
Figure 3.38 SNMP Details Screen
Read Community Accepts a character string identifying the group authorized to perform read
operations. The default setting is “Public.”
Write Community Accepts a character string identifying the group authorized to perform write
operations. The default setting is “Private.”
Trap Community Accepts a character string, which is included in SNMP traps generated by the
unit. The default setting is “Public.”
Trap IP Address Accepts the IP Address of a network device where alarm reporting traps are
to be sent.