Verilink WANsuite 6450, Reference Manual

Page: 72 / 205

3-44 W A N s u i t e 6 4 5 0
Tx Alarm Threshold Specifies the threshold (in bps) for the Transmit Alarm on this rule.
Tx Alarm Displays the current status of the Transmit Alarm.
Traffic Meter Statistics Screen
The Traffic Meter Statistics (Figure 3.36) screen displays the number of
frames and octets sent over a VPI/VCI that have been counted in accordance
with the Service Aware “rule” that has been established for a Service. As
such, it is
ATM
specific (i.e., VPI/VCIs only occur in
ATM
links). In addition,
this screen provides data rate performance information for the period of time
specified in the Period Index field (see below). Access this screen by clicking
on the appropriate “Statistics” hyperlink on the Service Aware screen.
Figure 3.36 Traffic Meter Statistics Screen
The Traffic Meter Statistics screen reports Transmit, Receive, and
Performance statistics on the following parameters:
•
Tx Frames
•
Tx Octets
•
Rx Frames
•
Rx Octets
•
Rate Peak – the peak data rate for the viewed period (see below)
•
Rate Average – the average data rate for the viewed period (see below)
The Period Index field is used to define the period of time for which the
Traffic Meter statistics will be reported. It represents the 24-hour, 15-minute
buckets index. Selecting a period and then clicking the “Submit” button will
display the traffic meter statistics for that period. The user-selectable options
are listed below.
Click on the “All Traffic Meter Intervals” button to see the screen shown below in
Figure 3.37.